Where to buy RC310 injectors? JRCivic?

**ChargedTegra** · April 18th, 2001, 10:40 PM

Subject says it all? Where did you guys get yours and for how much? I thought i remembered seeing JRCivic selling them for a good price? Maybe not? Thanks
-Bryan

**[MacGyver]** · April 18th, 2001, 11:11 PM

We dont sell RC's We can if thats what you want. but mostly we sell venom Injectors.

------------------
Matt Hutchins
Http://www.asrimports.com

**ChargedTegra** · April 19th, 2001, 01:07 AM

how much for the venom injectors, how do they compare to the RCs? I know with RC they offer a warranty with free cleaning etc.

**JRCivic** · April 19th, 2001, 04:11 AM

Brian,

I was not aware of any "Warranty" program with the RC products... however, I will call Russ tomorrow and check into this for you. I will post my findings.

Call me at the shop if you have questions... (205) 798-0112

Jim

------------------

'93 Civic Si H/B with B18C1, JRSC @ 8psi
Best 1320: 12.68 at 110 mph

**Mr Rogers** · April 19th, 2001, 05:43 AM

Endyn sells the 310's for $288 and the 370's for $298. RC will clean and bench test their injectors at not charge but you have to pay to ship them there.

------------------
98 GS-scR w/ 11psi JRSC, Walbro HO fuel pump, AEM cai, Endyn Kamikazi header, Godspeed testpipe, Thermal Exhaust, Skunk Works cam gears, J&S Ultra safeguard v1, RC 370's, Cartech FMU, Vortech regulator, Apex-i
V-AFC, H&R sports and KYB AGX's,ITR LSD, JR flywheel, Clutch Specialties stage 4, MSD digital 6 & HVC coil, Endyn stepper pulley, NX nitrous and of course to slow down, KVR X-drill F&R rotors and Carbon Kevlar pads and V1 to signal the slowing down.
Best et ==>13.6 @ 103mph w/ 2.3 60ft on Nitto drag radials @ 8psi of boost

**WickedPerform** · April 19th, 2001, 02:45 PM

Anyone know about the VENOM injectors ?

------------------
96 civic.
<> In the Workz <>
-B18a1,Endyn rods,Endyn pistons (9.3:1)bored 20 over,Federal Mougal Rod Bearings,Honda Main Bearings,Arp rod bolts, Arp head studs,Clutch Specialties Stage 3 Unsprung,Ported Polished Head,Federal Mougal Windshield Wiper Blades(seriously,soon to boost...

**phicycle** · April 19th, 2001, 02:49 PM

They're Ok for normally aspirated engines, but they aren't consistent enough from injector to injector for high output forced induction engines.
Venom's own race car uses RCE's.

**Mr Rogers** · April 20th, 2001, 07:37 AM

Not so hard to believe actually. They were running NOS solenoids on the same car. Wicked Performance and 4NRacer were there and saw them with their own eyes.

------------------
98 GS-scR w/ 11psi JRSC, Walbro HO fuel pump, AEM cai, Endyn Kamikazi header, Godspeed testpipe, Thermal Exhaust, Skunk Works cam gears, J&S Ultra safeguard v1, RC 370's, Cartech FMU, Vortech regulator, Apex-i
V-AFC, H&R sports and KYB AGX's,ITR LSD, JR flywheel, Clutch Specialties stage 4, MSD digital 6 & HVC coil, Endyn stepper pulley, NX nitrous and of course to slow down, KVR X-drill F&R rotors and Carbon Kevlar pads and V1 to signal the slowing down.
Best et ==>13.6 @ 103mph w/ 2.3 60ft on Nitto drag radials @ 8psi of boost